Aluminium Corrugated Sheet

For functional as well as aesthetic reasons, aluminium sheets are the most preferred material from simple houses to more complex industrial sheds and warehouses. It is non-combustible, non-flammable metal and resists fire. It also resists corrosion because of the thin hard aluminium-oxide coating. Length : 8’, 10’, 12’ Width : 32” Thickness : 0.4mm, 0.5mm, 0.7mm

Aluminium Profile Sheet

Aluminium Zinc coated steel profile sheets 0.7 to 0.9mm. thick as per ASTM A792 for Aluminium Zinc - different grades can be supplied on request. Aluminium profiled sheet is 0.7mm.up to 0.9mm. thick Alloy A3105 - H16 Temper from tension leveled coils - different Alloy can be supplied on request. Yield Strength 170 N/mm2 (Aluminium) Yield Strength 250 N/mm2 (Steel) Size: 1025mm x 3000mm x 0.7mm, 0.8mm, 0.9mm

American Red Oak

Product of USA Planks: 2” x 6” & above

Ash Wood

Product of USA Planks: 2”, 3”, 4” x 6” & above

Beech Wood

Product of Europe Planks: 1”, 2”, 3” x 4” & above

Bendy / Flexiform Plywood

A new technology in plywood manufacturing to serve you better! By providing bendy layers inside, this venner-faced plywood can easily

Block Board

Made in Malaysia, Indonesia, Brazil and China. Standard Sheet Size: 4’ x 8’ Thickness: 18mm

Calcium Silicate Board – TUFF

Calcium Silicate Board is the new “GREEN BUILDING MATERIAL”The boards are light weight, non-combustible and water resistant. The stable crystalline

Cement Fibre Board – TUFF

It is produced by mixing together wood, portland cement, and non-toxic chemical additives; and pressing them into flat sheet with

Cetol Gupa Wood Filler

Fast drying filler / stopper for interior and exterior use. It is recommended for use with clear or coloured Transparent Wood Finishes, Varnishes, etc.

Cherry Wood

Product of USA Planks: 2”, 3” x 6” & above

Commercial MDF Board

Made in Indonesia, Malaysia, New Zealand, Thailand, Chile, Germany, Romania, Brazil and Austria. MDF boards are suitable for furniture, cabinet,

Commercial Plywood

This is the most commonly used wooden board made of quality timber of which the core and outer layers are

CONMIX C500

Waterproof Tile Adhesive White 20 kg

Decor Polyester Plywood

These highly decorative plywood panels are surfaced with fancy papers which are creatively designed by floral and wood grain patterns

Deformed Steel Bars

Available in Nominal diameter of (mm) 8, 10, 12, 14, 16, 18, 20,22, 25, 32 Length (ft): 40

Fire Resistant Board (FR)

• Light weight, easy to install, cost effective and environment friendly. • Expansion and contractin under normal atmospheric conditions is

Fire Retardant MDF Board

Fire Retardant MDF is suitable for use in internal dry conditions for non-structural applications; ideal for applications such as wall

G.I. Corrugated Sheet

A purpose-oriented corrugated sheet made of selected quality Galvanized Iron (G.I.) with excellent features for roofing and side clading. Packed in sea-worthy envelopes. Length : 6’, 6.5’, 8’, 10’, 12’ Width : 32”, 39” Thickness : 28, 30, 32, 34, 35, 36 Gauge Complete fixing accessories are also available.

G.I. Profile Sheet

G.I. steel profiled sheets 0.7 to 0.9mm. thick as per ASTM A656 for GI - different grades can be supplied on request. Painting is baked regular modified enamel polyester, with 5 micron primer and 20 micron coat on the weathering side and 5/7 micron primer on the reverse w PVDF, Silicon, Modified Polyester, Platisol & ARS coating on request is applicable. Size: 1025mm x 3000mm x 0.7mm, 0.8mm, 0.9mm Colour: Red, White Coated

Galvanized Iron Grating

Specification: EN 10025 S275JR/BS 4360 GR 43A/ASTM A36 Size (mm): 1 mtr X 6 mtr

Hard Board

Standard Sheet Size: 4’ x 8’ Finish: Brown Thickness: 3.0mm, 3.2mm

Imperial Gold – Silicone Sealant

A General Purpose flexible waterproof Silicone Sealant that withstands moisture, heat and vibration. Adheres to clean metal, glass, most types of wood, ceramic, painted surfaces and many plastics.

Imperial Gold – Silicone Sealant

Siliconised acrylic sealant For Kitchen and Bathroom applications Easy to use Cures to a smooth finish Paintable Easy to clean with water

JIS BEAM (H and I)

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Size (mm): 150 x 150, 100 x 50

JIS Channels

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Size (mm): 100 x50 x 5, 125 x 65 x 6

Korinplex WBP Film Faced Plywood

Species : Combi Core Size : 18mm x 1220mm x 2440mm (13Ply) Thickness: 12mm, 18mm

LAMINATE FLOORING

Size: 196mm x 1215mm x 8mm Environment friendly. Easy To Lay. A Lasting Product. Easy To Maintain. Shock-Resistant. Resists Pets’ Scratches. Resists Heel-Marks. Resists Heavy Furniture’s Marks Resists Cigaratte Burns.

LAMINATE MOULDING – REDUCER

Reducer strip provides a smooth transition from laminate floor to a lower flooring surface, such as a vinyl floor or

Liquid Nails – Heavy Duty

Exterior and Interior Construction Adhesive Bonds to:
  • Plywood
  • particle board
  • Brick veneer
  • Corkboard Cement backerboard

M-seal

Regular Epoxy Compound
  • Seals
  • Joins
  • Fixes
  • Builds

Mahogany Wood

Product of Africa Planks: 1.5”, 2”, 2.5”, 3” x 6” & above

Maple (Hard & Soft)

Product of USA Planks: 2” x 6” & above

MDF Slat Board

•Manufactured in all MDF Melamine patterns on order. •Slot widths can be made as per customer requirement/sizes. •For patterns refer

MDF Wave Board

A very impressive wall panel. Fashionable patterns are engraved on the MDF boards. These boards are easy to fit and

Melamine MDF Board

Made in Indonesia, Malaysia, China. Both sides Melamine finish Melamine faced MDF boards available in White, Black, Red, Blue, Blonde

Moisture Resistant Board (MR)

• Suitable for high humidity and wet area applications such as bathrooms, kitchens etc. • The water resistant additives enhance

Moisture Resistant MDF Board

Moisture resistant MDF panel designed for use in humidconditions so is ideal for applications such as kitchen and bathroom furniture,

MS Angle – Equal

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Size (mm): 25 x 25 x 3.0, 40 x 40 x 3.0, 50 x 50 x 3.0

MS Angle – Unequal

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Size (mm): 75 x 75 x 6.0, 100 x 100 x 6.0

MS Chequered Sheets

Size:1220 X 2440 Thickness: 2mm to 5mm

MS Flat Bar

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Size (mm): 25 x 3, 40 x 3

MS Pipe

Specification: Size (mm): 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 and many more

MS Plate

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Size / Width: 4’x 8’ Thickness: 1.5mm to 8mm

MS Shafting Round Bars

Specification: JIS G3123 - SS41 Size (mm): 8, 10, 12, 16, 19, 20

MS Square Bars

Specification: IJIS G3101 - SS400 / ASTM A36 / EN 10025 S275JR Size (mm): 8, 10, 12, 16, 20, 25, 30, 32

One Side MDF Paper Overlaid

Made in Indonesia, Malaysia, China. One side Melamine finish Melamine faced MDF boards available in White, Black, Red, Blue, Blonde

Polycarbonate Sheet

A two-ply Polycarbonate sheet specially designed for diffusion and glazing. Developed for security protection with high light transmission. Highly resistance to abrasion and virtually unbreakable. APPLICATION: • Mainly used as a decorative, impact-free base for entrance gates. • One side texture for privacy. • High impact, stress-free laminated. • Absorbs total impact without dangerous spelling. • Lightweight for easy fabrication. • Major building code approved. Available Sizes: 200 x 300 x 3mm, 4mm, 6mm.

Polyester MDF Board

Highly decorative MDF boards are surfaced with fancy papers which are creatively designed with glossy polyester finish. The colours and

Premium Fix

The product is available in Grey and White colors

Prismatic Sheets

Prismatic and non see-through acrylic sheets with a decorative obscure clear surface. Highly hygienic and user friendly. Created to meet your specific requirements like indoor privacy glazing and diffusive partition and your budget! APPLICATION: • Indoor lenses. • Diffusive Lighting in bathroom cubicles. • Light weight partitions. • Green house lighting etc. Available Sizes: 4’ x 8’ x 2.8mm, 4’ x 8’ x 5mm

PVC Corrugated Sheet

Attractive translucent medium available in elegant colours to beautify your surroundings. Made of fine plastics, it can be used in interior and exterior decoration, garden houses, pavilions etc. Length : 6’, 8’, 10’, 12’ Width : 30” Thickness : 0.7mm Colors : White, Transparent White, Green, Transparent Green, Blue, Transparent Blue, Transparent Red, Transparent Yellow

Rectangular Hollow Section

Specification: JIS G3466 STKR400 Size: 12 x 12 x 1.2, 16 x 16 x 1.2 and many more

Red Meranti

Product of West Malaysia, Indonesia Size: 2” x 6”/ 8”/ 9”/ 10”/ 12” 3” x 6”/ 8”/ 9”/ 10”/ 12” 4” x 6”/ 8”/ 9”/ 10”/ 12” Length: 8’ and longe

Red Wood

Product of West Malaysia, Indonesia Size: 2” x 3”/ 4”/ 6”/ 8”/ 9”/ 10”/ 12” 3” x 3”/ 4”/ 5”/ 6”/ 8”/ 9”/ 10”/ 12” 4”x 6”/ 8”/ 9”/ 10”/ 12” Length: 8’, 10’-22’

Regular Gypsum Board

• Light weight, easy to install, cost effective and environment friendly. • Maximum thickness of 25mm and maximum length up

RUBBER FLOORING – PLAIN

Size: 60.2 x 60.2 cm Thickness: 3 mm

RUBBER FLOORING – STUDDED

Size: 60.2cm x 60.2cm Thickness: 3mm • Ideal for airports, boutiques, universities, shopping centers, nursing homes, canteens, theatres, banks and underpasses • Fire behaviour in accordance with international standards • High abrasion resistance • Cigarette burning resistance • Excellent sound absorption • PVC-free • Safe and hygienic • Easy to lay and clean • Slip resistance

Rubber Skirtings

Sizes: 2mm x 10cm x 15mtr, 2mm x 65mm x 15mtr Grey White Black Brown

SCAFFOLDING (Adjustable Props)

The Scaffolding Adjustable Props are used to support formwork shuttering. They are reusable products ensuring speedy erection and dismantling without the use of any tool

Setexplex WBP Film Faced Plywood

Offer in Hard Core, Combi Core and Poplar Core. Made in China. Standard Sheet Size: 4’ x 8’ Thickness: 12mm,

Square Hollow Section

Specification: JIS G3466 STKR400 Size (mm): 25 x 25 x 3.0, 40 x 40 x 3.0, 50 x 50 x 3.0

TD – Heavy Duty Industrial Flooring

Application: Swimming pools, factories Material: T.P.R Size: 30 x 30 x 1.6cm

Teak Wood

Product of Africa, Burma Square logs 10” x 10” x 10” & above Planks: 2”, 2.5”, 3”, 4” x 6” & above

TM – Anti-slip Flooring

Application: bathrooms, kitchens, footpath Material: soft PVC, PE Available In: Blue, Black , Red, Green, Grey Size: 30 x 30 x 1.3cm

Top Fix

TOP FIX is a water resistant, premixed latex modified cement based tile adhesive mortar. It’s a factory blend of Portland

Twin Wall Polycarbonate Sheet

Twin Wall Polycarbonate sheets are high performance, tough and safe wall glazing material. These comprises thin rectangular wall tunnel structure and offers high impact strength , light transmission all weather compatibility with excellent thermal insulation properties. Due to its light transmission, profile structure, ability to withstand extreme temperatures and long life these are extremely ideal for new and replacement greenhouse glazing and other similar uses where external lighting is used for internal lighting purposes. Length : 5.8mtr, 11.8mtr Width : 2.1mtr Thickness : 4mm, 6mm, 10mm. Colors : Clear, White, Green, Blue, Brown.

Twin-wall Roofing Panel

Twin Wall Polycarbonate sheets are high performance, tough and safe wall glazing material. These comprises thin rectangular wall tunnel structure and offers high impact strength , light transmission , all weather compatibility with excellent thermal insulation properties. Due to its light transmission, profilestructure,ability to withstand extreme temperatures and long life these are extremely ideal for new and replacement greenhouse glazing and other similar uses where external lighting is used for internal lighting purposes. Length : 5.8mtr, 11.8mtr Width : 2.1mtr Thickness : 4mm, 6mm, 10mm. Colors : Clear, White, Green, Blue, Brown. Made in Taiwan

Universal Beams

Specification: EN 10025 S275JR/BS 4360 GR 43A/ASTM A36 Size (mm): 75 x 40 x 5, 100 x 50 x 5 many more

UPN Channels

Specification: JIS G3101 –SS400 / ASTIM A36 / EN 10025 S275JR Designation: UPN 100, UPN 120

Veneer Faced Decorative Plywood

With exotic surface of reconstituted veneers, these plywood panels exhibit attractive appearance with their distinctive grains and configurations. Available in

Veneer Faced MDF Board

The wood veneer faced MDF boards are a new option for top quality office or household furniture. All the brightness

Vinyl Flooring Rolls

Thickness: 2 mm, 1.5 mm Length: 20 R mtr, 15 R mtr Width: 2mtr, 1.5mtr

Walnut

Product of USA, Canada Planks: 2”

Water Boiled Proof (WBP) Plywood

Made from superior quality hardwood, this plywood is also resistant to fungus, termites, woodborers, moulds, rots and cockroaches. This is

White Cement

Available in 50kg bag Origin: U.A.E. and India

White Wood

Product of Chile, Canada, New Zealand, Romania & Brazil Width: 2”, 4”, 5”, 6”, 8”, 9”, 10”, 12” Thickness: 1”, 2”, 3”, 4” Length: 13’

Wonder Foam

Polyurethane expanding foam
  • Seals
  • Insulates
  • Fills